Completion And Standardization Of Measurement Standards Used In The Field Of Surveying And Maps
DOI:
https://doi.org/10.5281/zenodo.17068776Keywords:
Measurement standards, verification, calibration, surveying and mappingAbstract
Measurement standards in the field of Surveying and Mapping are a form of technical infrastructure for surveying and mapping, playing a core role in the verification and calibration of measuring instruments. In recent years, a number of measurement standards for verification and calibration of measuring instruments have been established, such as: electronic total stations, leveling instruments, satellite positioning measuring instruments, photoelectric distance measuring instruments, theodolite measuring instruments, etc. In addition, some group 2 measuring instruments continue to need investment in establishing technical infrastructure for measurement standards in accordance with regulations, as well as the need to form measurement standards for group 1 measuring instruments when there is a request for verification and calibration. This article summarizes the situation of promulgation, publication and management of existing measurement standards, proposes measurement standards for verification and calibration of group 2 measuring instruments that are still lacking, and proposes solutions to standardize measurement standards used in verification and calibration of measuring instruments used in the field of Surveying and Mapping
Downloads
References
[1] Quốc hội, "Luật số 04/2011/QH13 của Quốc hội: Luật đo lường", 2011.
[2] Bùi Đăng Quang, Đề tài KHCN cấp Bộ TNMT, mã số TNMT2020.996.01 “Nghiên cứu cơ sở khoa học xây dựng quy định về công tác kiểm định, hiệu chuẩn phương tiện đo trong lĩnh vực đo đạc bản đồ”, 2022.
[3] EURAMET, "Guidelines on the calibration of autocollimators (EURAMET Calibration Guide No. 22)", Germany: EURAMET e.V. Braunschweig, 2017.
[4] Tống Công Dũng, Bùi Quốc Thụ, Trần Nam Anh, Vũ Khánh Phan, "Xây dựng hệ thống chuẩn đo lường quốc gia lĩnh vực góc phẳng tại Việt Nam", Tạp chí khoa học và công nghệ Việt Nam, số. 4, 2020.
[5] Bộ Khoa học và Công nghệ, "Thông tư 07/2024/TT-BKHCN ngày 08/10/2024 sửa đổi các văn bản quy phạm pháp luật thuộc thẩm quyền của Bộ trưởng Bộ Khoa học và Công nghệ liên quan đến Ủy ban Tiêu chuẩn Đo lường Chất lượng Quốc gia", 2024.
[6] ASTM International, "Standard guide for using the surface ground penetrating radar method for subsurface investigation (ASTM D6432-19)", PA: ASTM International West Conshohocken, 2019.
[7] British Standards Institution, "Specification for underground utility detection, verification and location (PAS 128:2014)", UK London, 2014.
[8] Ministry of Housing and Urban-Rural Development of the People’s Republic of China, "Technical specification for urban underground pipeline detection and survey (CJJ 61-2017)", Beijing, China, 2017.
[9] Thomas C. Weber Carlo Lanzoni, "A Method for Field Calibration of a Multibeam Echo Sounder", NH 03824 USA University of New Hampshire. Durham, 2011.
[10] David A. Demer, "Calibration of acoustic instruments", ICES cooperative research report, 2015.
[11] https://ieeexplore.ieee.org/document/5664519.
[12] https://scholars.unh.edu/cgi/viewcontent.cgi?article=1805&context=ccom.
[13] Bộ Khoa học và Công nghệ. TCVN 9426:2012.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
CC 4.0
